More...

ACQ196CPCI 96 channel 500 kSPS Simultaneous Digitizer

Analog Input Subsystem
Number Of Channels 96/64/32
Sample Rate 250, 500 kSPS/channel
Resolution 16 bits
Coupling DC, Differential Input
Sampling Simultaneous
Input Impedance 20kΩ default
10kΩ, 100kΩ (factory options)
Voltage Range ±10V default
±5V, ±2.5V (factory options)
Common Mode Range ±13V
Input Voltage Withstand ±100V
Offset Error DAC Offset trim to 0.01% FS [2]
Gain Error Numerical adjust to 0.01% FS [3]
INL ±3 LSB
DNL ±1 LSB
CMRR >60dB FS @ 1 kHz
THD >-85 dB
SINAD -84 dB [1]
SFDR 100 dBc [1]
SNR 86 dB [1]
Full Power BW 250 kHz
Small Signal BW 2 MHz
Crosstalk (3 dB) <90 dB @ 1 kHz FS Input
Temperature Stability <25 ppm/C
Analog Output (RTM-AO16)
Number of Channels 16
Conversion Time 1usec
Resolution 16 bit
Output Range ±10V
Output Drive Current 20mA per channel maximum
10mA per channel averaged over 16 channels
Reconstruction Filter 1pole
AWG Max Rate 500kSPS/channel
Digital I/O
Number 6
Switching Characteristics TTL
Maximum Clock Rate 1 MHz
Minimum High Time for Trigger 100 nS
Minimum Low Time for Trigger 100 nS

[1] : Typical values measured at full scale with a 9.76kHz input.
[2] : via hardware offset DAC set by calibration table
[3] : via post processing numerical adjust using onboard calibration table

ACQ196 Platform Features

Item Description
Form Factor Compact PCI, 6U. Fully Compliant PICMGworld 2.0R3.
PCI System and peripheral Slot capable
Bus Isolation mode for standalone networked operation
Max Onboard Memory 1 gigabyte
Backplane Bus Interface PCI 64 bit, 66MHz
Network Interface 1 Channels 100 base T ethernet, copper
Synchronisation 6 software routed DIO lines, can be switched to PXIworld signaling lines
FPGAworld Xilinx SPARTANworld, DSP capable.

ACQ196 Rear Transition Module Features

Item RTM1
Ethernet 100 Base T1 x RJ45 (copper)
Console 9 Way D-Type (38kbaud default)
Isolated DI 4 lines isolated input
Registered DIO 32 Bits, programmable direction, 24mA drive